Ruark Acoustics on jo vanha ja hyvin tunnettu englantilainen kaiutinvalmistaja.
Yritys ei ole suuri, mutta sen maine on vahva.

Esittelemme Ruark Heritage kaiutinsarjan, jossa on kolme mallia.

Nämä kaiuttimet toistavat musiikkia erinomaisesti.
Ne ovat nopeita ja rytmikkäitä ja sävelkorkeudet on helppo erottaa.
Tästä syystä melodioita on vaivatonta seurata ja siis kuulla, mitä
soittajat todellisuudessa puuhaavat äänitteellä.

Meistä se on tärkeintä kaiuttimien ominaisuuksista.

Ruark kaiuttimien hinnat ovat positiivinen yllätys, kuten hinnastostamme
voit vilkaista!

Ruark Sabre III

 

System Type:    Drive Units: Crossover:  Frequency Response: Nominal Impedance: Amplifier Requirements: Sensitivity:  Dimensions HxWxD: Weight each unpacked:  Available Finishes:

Bass Reflex 2 Way Monitor. Critically damped 18 & 25mm MDF construction with non symmetric brace system Tweeter: 27mm Sonolex lightweight textile dome ferrofluid cooled and damped. Optimised vented magnet system with acoustically damped rear chamber Bass/Mid: 150mm treated profiled pulped fibre cone. High loss pure rubber surround. Low reflection injection moulded alloy chassis. High flux magnet system. Lightweight voice coil assembly. High power handling capability. Precision audio grade components, Crossover point 3.2KHz 50Hz - 22KHz +/- 3dB (free space conditions) 8 ohms 25 – 120 watts 86dB/watt @ 1m 33.5cm x 20cm x 27cm 8 Kg Natural Oak & Rich Walnut (Yew & Rosewood available later as a cost option)   WHAT HI-FI: FIVE STAR REVIEW "... take the time to give them a serious listen and they'll pile on the plus points rapidly. These Sabre IIIs are lovely, likeable speakers that in most ways set sky high standards for the price you'll pay....they're lively with an enthusiastic top end that treads the thin line between excitement and excess with skill... the midrange is a glorious mix of insight, naturalness and speed... these Ruarks deserve an audition before you buy anything else at this price level... " WHAT HI-FI: SUPERTEST WINNER "The Ruarks' thrilling delivery really makes you want to listen to the music... class leading levels of detail... These are fantastic speakers that put Ruark's name firmly back on the speaker map."

Ruark Talisman III

 

System Type:    Drive Units: Crossover:  Frequency Response: Nominal Impedance: Amplifier Requirements: Sensitivity:  Dimensions HxWxD: Weight each unpacked:  Available Finishes:

Bass Reflex 2 Way Floorstanding Monitor. Critically damped 18 & 25mm MDF construction with internal non-symmetric brace system. Mass loading facility Tweeter: 27mm Sonolex dome with polymer surround allows excellent transient response with high stability. Optimised vented magnet system with acoustically damped rear chamber Bass/Mid: 180mm treated profiled pulped fibre cone. High loss pure rubber surround. Low reflection injection moulded alloy chassis. High flux magnet system. Lightweight voice coil assembly. High power handling capability. Precision audio grade components, Crossover point 3.0KHz 40Hz - 22KHz +/- 3dB (free space conditions) 8 ohms 25 – 120 watts 88dB/watt @ 1m 84cm x 22cm x 31cm 18 Kg Natural Oak & Rich Walnut (Yew & Rosewood available later as a cost option)   HI-FI NEWS "From the first few bars it was clear that the Talisman III is an accomplished performer... the Talisman somehow combines the bass power and control of a good three-way with the mid-band clarity and definition of a fine two-way design, while the treble had rather more resolution and smooth clarity than one could reasonably expect... a convincing sense of scale, richly textured basses and lush vibrant string tone... "

Ruark Crusader III

 

System Type:    Drive Units:     Crossover:  Nominal Impedance: Amplifier Requirements: Sensitivity:  Dimensions HxWxD (cm): Weight each unpacked:  Available Finishes:

Bass Reflex 3 Way Floorstanding Monitor. Critically damped 18 & 25mm MDF construction with internal non-symmetric brace system. Mass loading facility. Tweeter: 8.5 x 60mm low mass aluminium ribbon driven by advanced neodymium motor system mounted on machined alloy faceplate. Mid-Range: 75mm treated and damped fabric dome mounted on 75mm aluminium former and coil with internal vented magnet system. Bass: 180mm treated profiled carbon/pulped fibre cone with high loss low reflection rubber surround mounted into a rigid die-cast alloy chassis. High flux magnet system. Lightweight voice coil assembly. High power handling capability. Precision audio grade components,  Crossover points 500 Hz & 4 KHz 8 ohms 25 – 150 watts 88dB/watt @ 1m  95 x 23 x 32  26Kg Natural Oak, Cherry & Rich Walnut Responding to the demands of our customers, it is with great delight that we announce the third model to our Heritage Series, Crusader III. The original Crusader became highly regarded for producing a scale of sound that belied its modest dimensions but by using new and improved driver technologies and construction techniques for Crusader III we have produced a high-fidelity speaker which we feel is truly remarkable. Being a true three-way design each drive-unit has been developed to excel in its given frequency range. The upper frequencies are handled by a highly evolved ribbon tweeter where the low mass of the aluminium ribbon allows an extended frequency response and natural reproduction of harmonics. Likewise the 75mm dome has the right attributes to provide exceptional dispersion and performance through the mid-band frequencies. Bass frequencies are handled by a highly specified 180mm unit that provides exceptional control and extension. All the units are housed in cabinets that have been partitioned and optimised for acoustic performance whilst also providing elegant design and construction quality that Ruark have become renowned for. Crusader III’s efficiency and load make it suitable for use with a wide range of quality electronics both in audio and video applications, but it is in quality music based systems where we feel it will win many new admirers with its even-handed balance and musicality.

Ruark has established itself within the hi-fi industry as a loudspeaker manufacturer of considerable repute, setting its own standards in cosmetic and acoustic design, resulting in some of the most acclaimed and desirable loudspeaker systems available. 

Since the sad death of his father, Brian, Alan O'Rourke, a former technical engineer and musician (still), now heads the Ruark design team continuing the quest for absolute excellence. His appreciation of a musical instrument's natural timbre and dynamics, benefits the accurate and qualified appraisal of all our loudspeaker series. A dedicated and accomplished team, with a wealth of experience not only in loudspeaker design, but also in audio and music, furthers the Ruark philosophy of creating loudspeaker systems that reproduce the source without compromise.

This overriding premise has led to our sustained growth and success within both our UK and export markets. A leader in technical inspiration - Ruark has a long history of trend-setting innovation in domestic loudspeaker design. Today, as the advancement of digital technology broadens the range and diversification of home entertainment options, Ruark continues to set the agenda, with fresh ideas, advanced technology and progressive thinking. 

Ruark's objective is to continue our philosophy and purpose, sustaining our widespread influence in the world of loudspeaker technology now and into the future.

Alan is the founding member of Vita Audio and also the Managing Director of Ruark Acoustics a Company which has become highly respected by audio enthusiasts for the High Fidelity loudspeakers it designs and produces. Alan inherited his love of music and audio from his Father Brian, a gifted craftsman who also spent his life working within the British Audio Industry from its fledgling days in the 50’s to the high’s of the 80’s and 90’s. As a Father and Son with such entwined interests it was inevitable that one day they would work together and so it was in 1986 they formed Ruark Acoustics. Alan’s experience as a musician and a loudspeaker designer has given him a vast insight into how sound works and what makes a product sound ‘right’. To him most radios and small audio products available offered a level of sound quality and design that was just not acceptable. It was the belief that he could do something better that led to Alan and his business partner Neil Adams to form Vita Audio.

Neil Adams was working in retail management when his Father-in-Law Brian started Ruark Acoustics with Alan. Having previously worked as an Electronic Engineer he joined the fledgling company and worked with Alan and Brian looking after production. The early years were spent attending Hi-Fi shows and spending many hours in listening rooms helping to develop the unique Ruark sound. When Alan’s father retired from the business Neil became a director and is now responsible for the day to day running of the company. Neil is a keen windsurfer and when not at work can usually be found down at the local beach with Alan trying to perfect their carve gybes.